Call Today

 

 

We have found this article on What Would Cause My Electric Water Heater to Stop Working? directly below on the internet and concluded it made perfect sense to write about it with you over here.

Many modern-day homes make use of an electric water heater for their heating system, as a result of its comfort and also ease of use. However, just like any other electrical home appliances, troubles might arise with its usage, suddenly. It can be truly irritating to wake up to a cool shower as opposed to a warm one or having your bathroom with water that isn't warm sufficient or perhaps also hot. Whatever the situation may be, water heater issues can be rather stressful. Thankfully, we've made a list of possible solutions to your water heater concerns. There are a variety of variables that can trigger a number of these problems, it could be an issue with the power supply, the electrical burner, or the thermostat. Prior to doing anything, ensure you shut off the main power supply for safety. Whatever the problem is, getting it dealt with need to not posture excessive of a problem if you comply with these steps:

 

Examine Your Power Supply:

As standard as this might seem, it is very necessary. Without ample power, your hot water heater will certainly not work. So the first thing to do when your water all of a sudden stops working is to validate that it isn't a power issue. Inspect if the fuse is blown out or the breaker stumbled. If the circuit breaker is the issue, merely transform it off and on again. Change any type of damaged or worn-out fuse. Examine the home appliance with power after these changes to see if it's currently functioning.

 

Check the Burner in the Hot Water Heater:

If it's not a power problem, after that attempt having a look at your burner if it is still working. Test each of your heating elements to be sure the issue isn't with any of them. If any one of them is defective, replace that component and then examine whether the warm water is back on.

 

Check Your Thermostat:

If your hot water heater still isn't working or the water appearing isn't warm enough, you might need to examine the temperature settings on your top thermostat. Ensure the breaker is switched off prior to doing anything. Open the accessibility panel as well as press the red switch for temperature reset over the thermostat. This should aid heat up the water. Turn the breaker back on as well as check if the trouble has been resolved.

 

Call An Expert:

If after replacing all damaged parts as well as resetting your temperature level, the water heater still isn't functioning, you may require to call an expert plumber for a specialist opinion. The trouble with your heater could be that the cold and hot taps have actually been changed or it might be undersized for the amount of warm water needed in your house. Whatever the situation may be, an expert plumber would assist solve the issue.

 

Conclusion

Hot water heater troubles are not always major. Most of them are because of minor concerns like a blown fuse or worn-out heating element. Changing the faulty parts must suffice. However, if you are still not able to address the problem, give a call to your nearby plumber ahead to get it fixed.

 

What Would Cause My Electric Water Heater to Stop Working?

 

Your water heater is one of the most forgotten-about appliances in your home—until it quits working. Once you realize that there’s no hot water, the water heater jumps up to become the most noticeable appliance you have. No one in your family will be happy until you get the water heater fixed.

To fix an electric water heater as soon as possible, follow the troubleshooting advice discussed below.

 

Basic Water Heater Troubleshooting

 

Fortunately, you may be restore the hot water supply simply by resetting the house circuit breaker for the water heater. A tripped circuit breaker is one of the top causes of water heater failures. Shut the hot water heater breaker off then turn it back on. Give the water heater a half hour to heat up (if it’s working) and then check for hot water through one of your faucets.

If you get hot water after resetting the breaker, then the problem may be fixed if the breaker inadvertently tripped and it doesn’t continue tripping.

If the water heater breaker trips again, then you’ll likely need to have a service technician examine and repair the water heater. The service technician will check the circuit breaker and electrical supply wiring for the water heater. A short in the supply wiring or a bad circuit breaker could be causing the breaker to trip. An internal failure such as a broken heating element can also cause the breaker to continue tripping.

When resetting the water heater circuit breaker doesn’t work at all, then the water heater may be getting power while an internal water heater failure is causing the problem.

 

Conduct Advanced DIY Water Heater Troubleshooting

 

If the water heater doesn’t work after resetting the high-temperature limit switch, then you’ll need to either conduct some advanced water heater troubleshooting or have a service technician diagnose and repair the water heater failure.

Sears Technicians created a safe and highly-successful DIY advanced troubleshooting video to help you determine the cause of a water heating failure if you want to try to fix the problem yourself. Follow the advice in this video to find and fix the cause of the heating failure on your own:

 

The video begins with the basic troubleshooting described in the first 2 sections described above. It then goes on to guide you through checking water heater components to safely find the cause of the water heating failure.

If you get to a point in the troubleshooting where you’re not completely confident that you can safely continue, schedule a service technician to diagnose and repair the water heater.

The DIY water heater troubleshooting shown in the above video differs from the diagnosis techniques that service technicians typically use when examining a water heater to find the cause of a heating failure. Safe DIY troubleshooting doesn’t rely on live voltage checks while service technicians often use live voltage checks to quickly find the cause of water heater failures.

While many DIY’ers have been able to find the cause of water heater failures using troubleshooting advice shown in the video, some failures such as a bad circuit breaker can only be found using live voltage checks which should only be conducted by a trained service technician.

Sears Technicians have the training, tools and expertise to quickly find the cause of a water heater failure. Rely on our technicians to diagnose and repair your water heater or any other appliance in your home that quits working.

While the technician is in your home, take advantage of appliance Cleaning & Maintenance offers that the tech discusses with you. Keeping your appliances well-maintained will help them work more efficiently and last longer. Regular professional maintenance will also help prevent costly breakdowns of the appliances you depend on every day.

https://www.searshomeservices.com/blog/what-would-cause-my-electric-water-heater-to-stop-working

 

As an avid reader about What Would Cause My Electric Water Heater to Stop Working?, I thought sharing that portion was a good idea. Enjoyed our post? Please share it. Help others find it. I take joy in reading our article about Hot Water Heater Repair.

Give Me A Quote!